P-210CHX-S Peak 2 Post Clear Floor Car Hoist – 4500kg

CLEAR FLOOR DIRECT-DRIVE TWO-POST LIFT

Available in Dark Grey 

The model 210CHX is a new extremely high lifting 2 post lift.Lifting height up to 2000-2229mm

With standard features that include two height settings – low or high setting to suit different roof heights 4035/4313mm

Extra wide with 2710mm drive through clearance & Width Between Columns 3000mm With the single sided lock release there is no need for the operator to go to the other side of the lift and manually unlock both column locks, (as seen in most low cost lifts), and this complies with our local regulations

Only needing 100mm of concreate and single phase power supply this is the perfect lift for you home workshop

Direct drive full length hydraulic cylinders and quality powder coated finish.

Supplied with screw up feet & stackable adapters as standard supply.

The lock system is automatically activated as the lift is raised

All lifting and lowering operations are controlled from one column.

 

4 three-stages arms are suitable for more a wide range of vehicles

 

Available in single phase or three phase power supply

The Clear-floor design, provides unobstructed floor use and overhead safety shut-off device prevents high top vehicles from damage.

Automaster Equipment stock a complete inventory of parts for the equipment we sell.

This lift only needs 100mm of Reinforced concrete

FULLY CE (EUROPEAN) SAFETY CERTIFIED,

LOW COST COMMERICAL GRADE

Enquire Now
Click to show all 12 images
  • 4500kg (10,000 lbs) Capacity.
  • Dual Direct-drived cylinders,designed and made on high standard,with high quality oil seals.
  • Aero cable used for synchronization.
  • Single-point safety release, and dual safety design.
  • 4 three-stages arms are suitable for wide range of vehicles.
  • 2 pieces columns structure allows height-adjustable installation.
  • Automatic arms restraints.
  • Self-lubricating UHMW Polyethylene sliders and bronze bush.
  • Overhead safety shut-off device.
  • Detachable foot guard and tool trays.
Lifting Capacity
4500kg (10,000 lbs)
Lifting Time
64s
Max. Lifting height: (w/o extension adapter)
2000mm (78 3/4" )
Max. Lifting height: (w/ extension adapter)
2229mm (87 3/4" )
Max. lock height: (w/o extension adapter)
1960mm (77 5/32" )
Max. lock height: (w/ extension adapter)
2189mm (86 3/16" )
Overall Height
4313mm (169 13/16")
Overall Height
4035mm (158 7/8")
Overall Width
3666mm (144 11/32")
Drive-Thru Clearance
2710mm (106 11/16")
Width Between Columns
3000mm (118 1/8")
Minimum Pad Height
95mm (3 3/8")
Gross Weight
807kg (1,779 lbs)
Motor
230V 1PH
Packing Dimension
3920 X 510 X 820mm

Peak Warranty conditions from 01-06-2022

  • Steel structure components including Columns, Carriage, Lifting Arms, Top Beam, Floor Cover, Platform, Cross Beam, Car Drive-in Ramp, Scissor, Base frame etc warranty for FIVE YEARS.
  • Hydraulic parts including cylinders, oil seal, oil hose, fitting etc warranty for TWO YEARS.
  • Other parts electrical components, power unit (not including normal wear & tear/consumable parts such as rubber pad), warranty for TWO YEARS.
  • 4 Post parking lifts warranty as above when installed as a home workshop or parking lift. Not in commercial workshop use environment.

We ship all heavy equipment by freight truck and most accessories/spare parts by courier.

Most lifts are delivered on a curtain-sider truck (which may require a forklift to unload), while most tyre changers and balancers are delivered on a tail-lifter truck.

If you don’t have one, we can arrange a HIAB delivery for an additional cost.

We can also arrange installation on request.

Estimated delivery times:

  • Auckland: 1–2 days

  • Rest of North Island: 2–3 days

  • South Island: 4–5 days (ex AKL) / 1–2 days (ex CHC)

For special delivery requirements, just contact us.