AM-6764 Automaster Four Post Lift

Automaster Equipment Logo

The AM-6764 four post  lift is a commercial grade lift capable of lifting vehicles up to 6400Kg.

This lift has the added advantage of being capable of lifting up to 6.4T without compromising its capabilities for lifting normal passenger cars.

With its extra-long drive on ramps and 178mm low level lifting bed it is capable to load low riding vehicles with ease.

The AM-6764 has a platform length of 5564mm to accommodate long wheel base and light commercial vehicles.

Optional 3200Kg capacity rolling hydraulic jacking beams available to give a wheels free operation for when you need to do brake and suspension work.

The double lock safety system is automatically activated as the lift is raised and includes a cable brakeage emergency locking system should there be failure.

Pneumatically operated unlocking system is operated by simply pushing a button on the control panel.

The adjustable locking ladders in each post enable simple levelling of the lift and ensure all 4 corners of the lift are locked.

Also available is a optional bolt on wheel alignment kit should you need to perform wheel alignments .

Using only the very best quality components like  oil pumps, cylinders & electric motors (plus all other components) this lift will provide reliable, durable performance even in the most demanding environments.

Automaster lifts deliver years of dependability because they are built using only the highest quality component parts.

Automaster Equipment stocks a complete inventory of parts for the equipment we sell

Enquire Now
  • Optional 3200 kg Hydraulic Jacking beam controlled by pneumatic pump
  • Pneumatic locking system locks in all four posts of the hoist
  • 512mm Wide and 5564mm long runways to accommodate small and large vehicles
  • 6400kg max lift weight
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors are the very best China has to offer with proven reliably
  • Delivery and installation not included
  • Mechanical failure safety locks
  • Oil & Floor bolts included
  • Fully C.E. approved
  • Low voltage control system (as required by regulations)
Lifting capacity
6400kg
Column Height
2303mm
Width between columns
2900mm
Total Length
6885mm
Total width including motor
3538mm
Ramp length
975mm
Runway length
5564mm
Runway width
512mm
Power
380v
Weight
1900kg
Lifting time (approx)
60-70s
Lifting height
1850mm
Min. height
178mm

We ship all heavy equipment by freight truck and most accessories/spare parts by courier.

Most lifts are delivered on a curtain-sider truck (which may require a forklift to unload), while most tyre changers and balancers are delivered on a tail-lifter truck.

If you don’t have one, we can arrange a HIAB delivery for an additional cost.

We can also arrange installation on request.

Estimated delivery times:

  • Auckland: 1–2 days

  • Rest of North Island: 2–3 days

  • South Island: 4–5 days (ex AKL) / 1–2 days (ex CHC)

For special delivery requirements, just contact us.

No downloads available.